Knog Blinder road
quite simply in my opinion the lightest most attention grabbing rear light I've seen. After dropping my friend on a climb he said he could see me clear As day half a mile away , that's a promising sign when being followed by cars!
The light offers a variety of modes, flashing , strobing, pulsing and constant. Anc on its most economic setting lasts for hours. This is my number one recommendation for a rear light
70 lumens in strobe mode (peak)Dimensions: W27mm x H76mm x D52mmWeight: 52gMaterials: UV-Resistant, industrial-grade Silicone Rubber Body and Straps. Polycarbonate Housing. PMMA Lens. Anodised Aluminium Heat sink. Anodised Aluminium Fascia and solid Stainless Steel MIMLatch.Rechargeable Lithium Polymer (USB). This saves using about 600 AAA Alkaline batteries during the lights lifetime.LEDs: 1 x CREE XPD XB-D LED, 3 x Super bright LEDsLens: Collimated optics.Visibility: Visible from a distance of min. 1000 metres. Incorporates side Illumination with visibility of 290°Beam Angle (degrees): Wide beam 80°. Narrow beam 22°LiPo Technology with battery protection circuit. USB Rechargeable and extension cord included.Constant current drive technology: Maintains consistent brightness throughout specified run-time.Integrated USB Plug: Designed to be exposed to the elements, the plug is also waterproof and will not be damaged by exposure.Waterproof: 100% Waterproof and Dust Proof.Light Modes: 5 light modes: 1.Steady, 2.Fast, 3.Chaser, 4.Peleton, 5. Eco-Flash.Burn time: lasting up to 3.5 hours in Steady mode, 4 hours in Fast, 5 ours in Chaser, 13 hours in Peloton Mode and 20 hours in Eco-Flash.Charge time: 5 hour charge timeButton: New longer button push on (0.75sec) prevents accidental activation of your light. Shortpresses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec).Low battery indicatorBike Attachment: Tool-less attachment for standard rear posts measuring 22-32mm. Not suitable for aero post designTesting: The Blinder Road has been tested against the following; Drop tests, corrosion tests, UV tests,Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE certification.
The light offers a variety of modes, flashing , strobing, pulsing and constant. Anc on its most economic setting lasts for hours. This is my number one recommendation for a rear light
70 lumens in strobe mode (peak)Dimensions: W27mm x H76mm x D52mmWeight: 52gMaterials: UV-Resistant, industrial-grade Silicone Rubber Body and Straps. Polycarbonate Housing. PMMA Lens. Anodised Aluminium Heat sink. Anodised Aluminium Fascia and solid Stainless Steel MIMLatch.Rechargeable Lithium Polymer (USB). This saves using about 600 AAA Alkaline batteries during the lights lifetime.LEDs: 1 x CREE XPD XB-D LED, 3 x Super bright LEDsLens: Collimated optics.Visibility: Visible from a distance of min. 1000 metres. Incorporates side Illumination with visibility of 290°Beam Angle (degrees): Wide beam 80°. Narrow beam 22°LiPo Technology with battery protection circuit. USB Rechargeable and extension cord included.Constant current drive technology: Maintains consistent brightness throughout specified run-time.Integrated USB Plug: Designed to be exposed to the elements, the plug is also waterproof and will not be damaged by exposure.Waterproof: 100% Waterproof and Dust Proof.Light Modes: 5 light modes: 1.Steady, 2.Fast, 3.Chaser, 4.Peleton, 5. Eco-Flash.Burn time: lasting up to 3.5 hours in Steady mode, 4 hours in Fast, 5 ours in Chaser, 13 hours in Peloton Mode and 20 hours in Eco-Flash.Charge time: 5 hour charge timeButton: New longer button push on (0.75sec) prevents accidental activation of your light. Shortpresses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec).Low battery indicatorBike Attachment: Tool-less attachment for standard rear posts measuring 22-32mm. Not suitable for aero post designTesting: The Blinder Road has been tested against the following; Drop tests, corrosion tests, UV tests,Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE certification.